Rapid Set TRU Spiked Roller - Specialty Finishing Roller for Self-Leveling Overlays
HIGHLIGHTS
- 24" wide finishing roller
- 1-1/4" long, 1/64" super thin stainless steel spikes
- Easily place up to 1/2"deep pours
- Minimizes Pinholes: Efficiently releases trapped air with ultra-thin stainless steel spikes
- Improves Floor Appearance: Removes rake lines and assists in leveling
DESCRIPTION: The Rapid Set® TRU SPIKED ROLLER is a specialty 24" (61 cm) finishing roller with an included frame designed specifically for Rapid Set self-leveling products. It efficiently releases air trapped during mixing, significantly reducing the occurrence of pinholes. The SPIKED ROLLER also improves the uniformity of the finished floor by removing lines left by the gauge rake or smoother. The 1-1/4" (3.2 cm) stainless steel spikes are durable and can be easily cleaned for repeated use.
USES: Use the TRU SPIKED ROLLER with Rapid Set® TRU® Self-Leveling, TRU® Gray Self-Leveling, LevelFlor®, Concrete Leveler®, or any other self-leveling overlayment, underlayment, or coating.
ASSEMBLY: Loosen the wing nuts and swing the arms out. Insert the roller into the frame and snug the arms. Hand-tighten wing nuts. Then simply insert any standard threaded extension pole into the frame, and the roller is ready for use.
INSTRUCTIONS: Place the self-leveling material using traditional methods. Roll the TRU SPIKED ROLLER in the opposite direction of the gauge rake. One pass down and back is generally all that is required to remove entrapped air. Multiple passes may be necessary if bubbles can be seen forming on the surface. Due to the proximity of the steel spikes, this roller may push coarser aggregate, like that found in TRU PC, toward the substrate, making it more difficult to expose when grinding. For maximum aggregate exposure in TRU PC, use the TRU PC Spiked Roller. Never use the TRU SPIKED ROLLER after the film has begun forming at the surface.
