Moisture Barrier and Consolidating Epoxy - 2.2 U.S.GAL PAIL PART A
(2-part system: each kit requires Part A & Part B)
Planiseal® MB is a 100%-solids, epoxy moisture barrier that is designed to effectively stop moisture-related problems with toppings, as well as act as a surface-consolidating epoxy.
- Treats substrates with up to 25 lbs. (11.3 kg) MVER per ASTM F1869 and/or relative humidity (RH) up to 100% per ASTM F2170
- Low viscosity allows it to penetrate into the substrate, consolidating and tightly bonding surfaces to substrates.
- Low odor and VOC compliance for use in interior, occupied environments
- Single-coat applicability means faster turnaround and lower installation costs.
- Extended working time allows trapped air to escape and ensures film integrity.
- Alkaline-resistance-tested for prolonged exposure to a pH of 14 per ASTM D1308 with no effect on Planiseal MB
- Cost-effective protection against the most severely MVER-challenged substrates
- Deep penetration into substrate provides a strong, consolidating effect.
![Primer SN™ [NA] Two-Component, Filled, Epoxy Primer - Part A](https://cdn11.bigcommerce.com/s-yrxo00xam4/images/stencil/500x659/products/3196/9028/39_3002901-primer-sn-parta-2-17gal_fb0e518348564752b9ff9e4b6966456c__78768.1767318763.png?c=2 "Primer SN™ [NA] Two-Component, Filled, Epoxy Primer - Part A")
![Primer SN™ [NA] Two-Component, Filled, Epoxy Primer - Part A](https://cdn11.bigcommerce.com/s-yrxo00xam4/images/stencil/500x659/products/3196/9027/40_3002901-primer-sn-appl_0f204f0dba09411e9b5c1e290273809f__79658.1767318759.jpg?c=2 "Primer SN™ [NA] Two-Component, Filled, Epoxy Primer - Part A")
