• My Cart

    Your cart is empty

    You have no items in your shopping cart.

POLYUREAS

7 Item(s)

List Grid

Set Descending Direction
  1. Rapid Refloor XP

    Rapid Refloor XP

    Rapid Refloor XP is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor XP is a rigid structural polymer with a Shore D Hardness of 75-80. Learn More
    $158.49
  2. SPAL-PRO RSF

    SPAL-PRO RSF

    Spal-Pro RSF is a rapid setting, semi-rigid polyurea joint filler specially formulated for use in a wider range of temperatures than typical polyurea joint fillers. RSF’s innovative chemistry is ideally suited for application in low temperature applications such as industrial freezer/cooler buildings and allows for traffic access in as little as 3-5 hours at subzero temperatures. With a Shore A Hardness of A88-94 RSF provides superior joint edge protection in even the most demanding settings. Learn More

    Starting at: $66.25

  3. SPAL-PRO 6S 65

    SPAL-PRO 6S 65

    In retail and polished concrete floors subject to primarily pedestrian/cart traffic Spal-Pro RS 65 Rapid Set, Semi-Rigid Polyurea joint sealant is a good option. The product offers superior expansive capabilities for a semi-rigid product and can be installed prior to a concrete polishing process. With a Shore A Hardness of A64-69 it still provides joint edge protection superior to other traditional “sealants.” Spal-Pro RS 65’s rapid cure time ensures quick access to the floor for traffic and polishing applications. Learn More
    $57.50
  4. SPAL-PRO 2000

    SPAL-PRO 2000

    Spal-Pro 2000 is a 100% solids, two component heavy duty polyurea polymer designed for the repair of joints, cracks and other defects in industrial concrete floors. Spal-Pro 2000’s rapid set chemistry allows for restoration of traffic in as little as 30 minutes after placement and can be applied in a wide range of temperatures and settings from freezer/coolers to ambient areas. It’s Shore A Hardness of 95+ ensures maximum joint edge support and long term durability of repairs. Learn More

    Starting at: $328.50

  5. RAPID REFLOOR

    RAPID REFLOOR

    Metzger/McGuire’s Rapid Refloor is a two component, 100% solids low viscosity structural polyurethane design for repairing pop-outs, bolt holes, delamination, cracks and other surface defects in retail and industrial concrete floors. Rapid Refloor’s thin viscosity allows for penetration/repair of very small defects and its rapid cure time allows for grinding/finishing procedures to take place in as little as 30 minutes. Ideal for repairing defects in stained and polished concrete floors. Learn More
    $57.50
  6. SPAL-PRO RS 88

    SPAL-PRO RS 88

    In retail and polished concrete floors, Spal-Pro RS 88 Rapid Set, Semi-Rigid Polyurea joint filler is an ideal choice for joint edge protection. Its rapid cure time allows for faster floor access for traffic and polishing applications. With a Shore A Hardness of 88-92, Spal-Pro RS 88 offers optimal joint edge protection with better lateral movement properties and reduced staining and discoloration when compared to standard epoxy joint filler. Learn More
    $47.50
  7. RAPID REFLOOR PIT GROUT

    RAPID REFLOOR PIT GROUT

    Metzger/McGuire’s Rapid Refloor Pit Grout is a two component, 100% solids low viscosity structural polyurethane designed to repair micro level defects such as pin holes, scratches, gouges, pitting and other defects in the concrete surface. When applied as a flood coat and ground off the surface Pit Grout restores micro-defects and can enhance surface gloss in polished concrete floors. Learn More
    $45.00

7 Item(s)

List Grid

Set Descending Direction

content management, website design, e-commerce and web development services in Erie, Pennsylvania