Niagara Machine
BLASTPRO STEEL SHOTBLASTERS
BP-20-40
LITERATURE
  • modular construction that allows the machine to be dismantled to fit through a 24-inch manhole and reassembled by two men in one hour.
  • 20-inch blast pattern
  • 40hp electric motor
  • on-board dust collector
  • highest production on the market and reassembled by two men in one hour.
  • Travel Speed: 2.5 - 95 ft/min.
  • Blast Pattern: 20"
  • Up to 940 sq. ft./hr. on bare steel
  • Blast Wheel Power: 40 hp
  • (L x W x H): with DC onboard - 64" x 93" x 27"
    w/o DC onboard - 64" x 70" x 27"
  • Weight: 1,542 lbs.
SHELL MACHINE
Vertical Blasting Machine

The BlastPro vertical shot blasting system is designed for blasting and cleaning vertical and near vertical steel surfaces of water or petrochemical tanks and ship hulls. The system runs left to right for maximum pass coverage. The Shell Machine comes with rigging for the floating roof oil storage tanks. The travel speed is controlled remotely from a mobile control station and air actuated magnets keep the machine blasthead adhered to the surface to prevent the loss of abrasive. The BP 9-54 Steel Dust Collector is included with the Shell Machine.

Model Number
BPS-225
Shell Machine
Minimum Generator
(required/not included)
125 Kw
Production Capacity:
800 sq. ft./hr.
Dimensions L x W x H
68" x 42" x 91"
Blast Pattern:
38"
Weight:
2,040 lbs.
Dust Collector
BP 9-54 Steel
Power Cord Included:
100 ft.
Blast Motor:
(2) 25 hp
Seals:
Urethane Mouth
Voltage:
480v



Vertical blaster working the side of an oil storage tank.
Niagara Machine, Inc. • 325 W. Front Street • Erie, PA 16507 • Phone: (814) 455-8838 • Fax: (814) 454-0160

TOLL FREE 1-800-622-2048 • Send E-mail